BiWire Panel Range

Product Codes

FX2202BW 2 Zone Panel
FX2204BWHMO 4 Zone Panel
FX2208BWHMO 8 Zone Panel
FXRP2200BW Repeater Panel

Common Technical Specifications

Model EN54-2: 1998 & EN54-4:1998 EN50130-4: 1996 EN500081-1: 1992 & EN61000-2-2: 1994
Detectors/sounders per zone 20-20
Alarm circuit load 150mA per zone
End of line devices Active end of line monitoring unit
Auxiliary fire signal/fault o/p 1A 24V dc single pole changeover contacts
Mains input voltage 230V ac –10% +15%
System operating voltage 24V dc
Standby duration 24 hours
Recharge period 24 hours
Panel construction Polycarbonate housing & back box
Cable entries Top: 12 x 20mm entries with blanking plugs, rear cable entry aperture.
Environmental rating IP30. -5°C to +40°C Humidity 75% max (non condensing)

Technical Specification - 2 Zone Panel

Model FX2202BW
Number of zones 2
HMO facility N/A
Battery (sealed lead acid) 1 x 2.1 Ah 12V
Dims WxHxD (mm) 260 x 212 x 72

Technical Specifications - 4 Zone Panel

Model FX2204BWHMO
Number of zones 4
HMO facility Yes (all zones)
Battery (sealed lead acid) 1 x 3.2 Ah 12V
Dims WxHxD (mm) 332 x 270 x 92

Technical Specifications - 8 Zone Panel

Model FX2208BWHMO
Number of zones 8
HMO facility Yes (all zones)
Battery (sealed lead acid) 2 x 3.2 Ah 12V
Dims WxHxD (mm) 332 x 270 x 92

Bi-Wire

Bi-Wire Panels
Bi-Wire Range

The new Cooper range of Bi-Wire panels are designed with Cooper patented 2 wire technology and also includes ‘Self-Check’ detector features. Bi-Wire conventional detectors, sounders, LED strobes, including relay modules, all share the same zone wiring, delivering significant cost savings in both cable and installation costs.

All panels have the facility to flash detector LED’s in a zone to facilitate the location of any wiring fault in that zone, thereby simplifying the fault finding process. The 4 and 8 zone panels provide enhanced features, which includes HMO programming per zone via the easily accessible DIP switch. If a Zone is programmed for HMO and a fire occurs in that zone, only the sounders in that zone will sound, if the fire is cleared within 2 minutes, the panel will reset automatically, otherwise the sounders in all the zones will operate.

Features

  • Available in 2, 4, and 8 zones
  • Self-Check features as standard
  • Detectors, sounders and relay modules share same wiring
  • HMO facility and repeater output on 4 and 8 zone panels
  • Class change facility
  • Selectable fire/fault relay
  • Supports up to 20 sounders and 20 ancillaries per zone
  • Detector removal indication as standard
  • Maintenance-free poly switch circuit protection
  • Weekly test/walk test facility

Bi-Wire Repeater Panel
FXRP2200BW

To complement the Bi-Wire range a repeater panel is available for connection to the 4 and 8 zone Bi-Wire panels.

Features

  • Repeater matches the style and appearance of main control panels
  • Facility for signaling to repeater panel provided as standard on 8 zone panel
  • Specially configured versions of 2 and 4 zone panels available for use with a repeater panel
  • Displays essential information at other key locations in a large building/site
  • Zone fire and fault conditions
  • Test mode in operation
  • Zones or alarm lines in disabled mode
  • Repeater panel requires only a single pair of wires to receive signals from main control panel, plus local mains power supply, reducing cost of installation
Download datasheet »